Home What We Do Solutions Specialty Chemicals Specialty Chemicals Resources Jet Fuel Test Fuel Main Navigation Overview Products Services Resources Accounts Contacts Jet Fuel Test Fuel Use this form to create specifications for a made-to-order Jet Fuel. Upon confirming whether or not the fuel can be produced, a written quote with earliest availability and pricing will be provided by our Sales and Customer Service. You must have JavaScript enabled to use this form. First Name Last Name Company Address Phone Fax Email Address Proposed Fuel Name Volume needed for this inquiry Bulk Gallons 54 Gallon Drums Volume needed long term Monthly Yearly Typical Tests Used to Certify Jet Fuels Identify the Minimum and Maximum values and the tests where Report values are needed. No test will be ran if a Report or Minimum and Maximum Value is not identified. Use a TDS from an existing performance fuel to help establish the desired data. Property: Color, SayboltTest Method: ASTM D 156 Minimum Value Maximum Value Property: Specific Gravity 60/60 ºFTest Method: ASTM D 4052 Minimum Value Maximum Value Property: API GravityTest Method: ASTM D 1298 Minimum Value Maximum Value Property: Conductivity, pS/mTest Method: ASTM D 2624 Minimum Value Maximum Value Property: Total Acidity, mg KOH/gTest Method: ASTM D 3242 Minimum Value Maximum Value Property: Corrosion, 2h at 212º FTest Method: ASTM D 3242 Minimum Value Maximum Value Property: Particulate Matter, mg/LTest Method: ASTM D 5452 Minimum Value Maximum Value Property: Existent Gums, mg/100 mLTest Method: ASTM D 381 Minimum Value Maximum Value Property: Doctor TestTest Method: ASTM D 235 Minimum Value Maximum Value Property: Mercaptan Sulfur, ppmTest Method: ASTM D 3227 Minimum Value Maximum Value Property: Freeze PointTest Method: ASTM D 2386 Minimum Value Maximum Value Property: Smoke Point, mmTest Method: ASTM D 1322 Minimum Value Maximum Value Property: Water Reduction InterfaceTest Method: ASTM D 1094 Minimum Value Maximum Value Property: Sulfur, ppmTest Method: ASTM D 5453 Minimum Value Maximum Value Property: Viscosity at 20ºC, cStTest Method: ASTM D 445 Minimum Value Maximum Value Property: Reid Vapor Pressure, psiaTest Method: ASTM D 5191 Minimum Value Maximum Value Property: Hydrogen Content, wt%Test Method: ASTM D 3343 Minimum Value Maximum Value Property: Net Heat of Combustion, Btu/lbTest Method: ASTM D 3338 Minimum Value Maximum Value Property: MSEP before and/or after additivesTest Method: ASTM D 3948 Minimum Value Maximum Value Property: Filtration Time in MinutesTest Method: MILDTL 83133E Minimum Value Maximum Value Property: JFTOT Tube Color TestTest Method: ASTM D 3241 Minimum Value Maximum Value Property: JFTOT ^P, mm HgTest Method: ASTM D 3241 Minimum Value Maximum Value Property: Anti-Icing, vol%Test Method: ASTM D 3338 Minimum Value Maximum Value Property: Antioxidant, lMbblTest Method: ASTM D 1319 Minimum Value Maximum Value Property: Corrosion Inhibitor, lbs/Mbbl Minimum Value Maximum Value Property: Loss Residue Minimum Value Maximum Value Property: Distillation Range at 760 mmHg, ºFTest Method: ASTM D 86 Minimum Value Maximum Value Property: Initial Boiling Point at 10% Minimum Value Maximum Value Property: Initial Boiling Point at 50% Minimum Value Maximum Value Property: Initial Boiling Point at 90% Minimum Value Maximum Value Property: Initial Boiling Point at End Point Minimum Value Maximum Value Property: Hydrocarbon Type, vol% (Aromatics)Test Method: ASTM D 1319 Minimum Value Maximum Value Property: Hydrocarbon Type, vol% (Olefins)Test Method: ASTM D 1319 Minimum Value Maximum Value Property: Hydrocarbon Type, vol% (Saturates)Test Method: ASTM D 1319 Minimum Value Maximum Value Additives SelectStandard AdditivesNo Additives Additives Comments Other Tests Additional Comments Terms and Conditions You are required to check the "I agree to the Chevron Phillips Chemical Terms and Conditions" checkbox before submitting. Read more about our Terms and Conditions. I agree to the Chevron Phillips Chemical Terms and Conditions
