cpchem.advancedSearch.section: corporate; specialty
Specialty Chemicals - Chevron Phillips Chemical Company LLC
 
Links to other Chevron Phillips Chemical Information
  |  Chevron Phillips Chemical   |  Products  |   eService Center  |   Data Sheets  |   Global Contacts  |  
 
eSERVICE CENTER QUICK LINK
Headquarters
10001 Six Pines Drive
The Woodlands, TX 77380
832.813.4100
800.858.4327

© 2009 Chevron Phillips Chemical
Company LLC

Legal Notice
Webmaster
Specialty Chemicals > Products > Made-to-Order Test Fuels > Jet Fuel Test Fuel 


Jet Fuel Test Fuel 

Use this form to create specifications for a made-to-order Jet Fuel. Upon confirming whether or not the fuel can be produced, a written quote with earliest availability and pricing will be provided by our Sales and Customer Service.

*required field

 

Customer Name: *
Company Name: *
Mailing Address:
Telephone: *
Email: *
Fax:
Proposed Fuel Name: *

Volume Needed for this Inquiry: 

Bulk Gallons

54 Gallon Drums


Volume Needed Long Term: Monthly

Yearly

   

 Typical Tests Used to Certify Jet Fuels:

Identify the Minimum and Maximum values and the tests where Report values are needed.  No test will be ran if a Report or Minimum and Maximum Value is not identified.

Use a TDS from an existing performance fuel to help establish the desired data.

 Property

 Minimum Value

 Maximum Value

Test Method 

 Color, Saybolt      ASTM D 156
 Specific Gravity 60/60º F      ASTM D 4052
 API Gravity      ASTM D 1298
 Conductivity, pS/m      ASTM D 2624
 Total Acidity, mg KOH/g      ASTM D 3242
 Corrosion, 2h at 212º F      ASTM D 130
 Particulate Matter, mg/L      ASTM D 5452
 Existent Gums, mg/100 mL      ASTM D 381
 Doctor Test      ASTM D 235
 Mercaptan Sulfur, ppm      ASTM D 3227
 Freeze Point      ASTM D 2386
 Smoke Point, mm      ASTM D 1322
 Water Reduction Interface      ASTM D 1094
 Sulfur, ppm      ASTM D 5453
 Viscosity at 20ºC, cSt      ASTM D 445
 Reid Vapor Pressure, psia      ASTM D 5191
 Hydrogen Content, wt%      ASTM D 3343
 Net Heat of Combustion, Btu/lb      ASTM D 3338
 MSEP before and/or after additives      ASTM D 3948
 Filtration Time in Minutes       MILDTL 83133E
 JFTOT Tube Color Test      ASTM D 3241
 JFTOT ^P, mm Hg      ASTM D 3241
 Anti-Icing, vol%      ASTM D 3338
 Antioxidant, lMbbl      ASTM D 1319
 Corrosion Inhibitor, lbs/Mbbl       
 Loss Residue      
 Distillation Range at 760 mmHg, ºF      ASTM D 86
 Initial Boiling Point 10%      
 Initial Boiling Point 50%      
 Initial Boiling Point 90%      
 Initial Boiling Point - End Point      
 Hydrocarbon Type, vol% - Aromatics      ASTM D 1319
 Hydrocarbon Type, vol% - Olefins      ASTM D 1319
 Hydrocarbon Type, vol% - Saturates      ASTM D 1319

 

 

  
Additives: *

Comments regarding Additives:

Other Tests

Additional Comments



At Chevron Phillips we value your privacy, and we have taken steps to ensure that the information you submit remains private.