|
Headquarters 10001 Six Pines Drive The Woodlands, TX 77380 832.813.4100 800.858.4327
© 2009 Chevron Phillips Chemical Company LLC
Legal Notice
Webmaster
|
|
|
|
| All Specialty Chemicals Products |
| Products |
MSDS |
TDS |
Application |
| cis-2-butene, pure grade |
 |
 |
Health & Pharmaceutical |
| cis-2-butene, technical grade |
 |
 |
Health & Pharmaceutical |
| n-butane, instrument grade |
 |
 |
|
| n-butane, pure grade |
 |
 |
|
| n-decane, commercial grade |
 |
 |
|
| n-decane, pure grade |
 |
 |
|
| n-dodecane |
 |
 |
|
| n-dodecyl methyl sulfide |
 |
 |
|
| n-heptane, 95% |
 |
 |
|
| n-hexadecane |
 |
 |
|
| n-hexane, 95% |
 |
 |
|
| n-hexane, pure grade |
 |
 |
|
| n-octadecane |
 |
 |
|
| n-octane |
 |
 |
|
| n-tridecane (developmental) |
 |
 |
|
| n-undecane (developmental) |
 |
 |
|
| tert-butyltoluene (developmental) |
 |
 |
Health & Pharmaceutical |
| tert-dodecyl mercaptan (Sulfole® 120 mercaptan) |
 |
 |
Additives, Modifiers & Solvents |
| trans-2-butene, pure grade |
 |
 |
Health & Pharmaceutical |
| trans-2-butene, technical grade |
 |
 |
Health & Pharmaceutical |
| 2,3-dimethylbutane (diisopropyl) |
 |
 |
|
| 2,4,4-trimethylpentene-1 (2,4,4-trimethyl-1-pentene, DIB-1) |
 |
 |
Health & Pharmaceutical |
| 2-butene, mixed isomers, pure grade |
 |
 |
Health & Pharmaceutical |
| 2-butene, mixed isomers, technical grade |
 |
 |
Health & Pharmaceutical |
| 2-hydroxyethyl n-octyl sulfide |
 |
 |
|
| 2-methylpentane (isohexane) |
 |
 |
|
| 2-pentanethiol (developmental) |
 |
 |
|
| 3,3-dimethyl-1-butene, technical grade (neohexene) |
 |
 |
Flavors & Fragrances, Health & Pharmaceutical |
| 3-methylpentane |
 |
 |
|
| 65th Percentile IVD Test Fuel |
 |
 |
Deposit Test Fuels - Gasoline |
| Aviation Check Fuel 100/130 |
|
 |
Calibration Standard |
| Brazilian Yellow Gasoline |
 |
|
Oxygenated Test Fuels |
| California P-II Certification Fuel |
 |
 |
Emission Certification Fuels - Gasoline |
| California P-III Certification Fuel |
 |
 |
Emission Certification Fuels - Gasoline |
| Cat Gasoline |
|
|
Fuel Blendstocks |
| Cold CO Test Fuel |
 |
 |
Emission Certification Fuels - Gasoline |
| cyclopentane, pure grade |
 |
 |
|
| DEHA (N,N-diethylhydroxylamine), 85% |
 |
 |
Imaging & Photography, Water Treatment |
| DEHA (N,N-diethylhydroxylamine), 98% |
 |
 |
Imaging & Photography, Water Treatment |
| di(2-hydroxyethyl) disulfide |
 |
 |
|
| di-n-butyl disulfide |
 |
 |
|
| di-n-octyl disulfide (developmental) |
 |
 |
Metalworking & Metal Processing |
| di-n-propyl disulfide |
 |
 |
Flavors & Fragrances |
| di-sec-butyl disulfide |
 |
 |
|
| di-tert-butyl disulfide |
 |
 |
|
| di-tert-butyl polysulfide (TBPS 454) |
 |
 |
|
| di-tert-dodecyl disulfide |
 |
 |
|
| Diesel .05 (5Y5) Certification Fuel (Type II) |
 |
 |
Emission Certification Fuels - Diesel |
| Diesel 2007 ULSD (7-15 ppm) Emission Certification Fuel |
 |
 |
Emission Certification Fuels - Diesel |
| Diesel Cetane Check Fuel, high |
 |
 |
For cetane number analysis per ASTM D 613 |
| Diesel Cetane Check Fuel, low |
 |
 |
For cetane number analysis per ASTM D 613 |
| Diesel EURO III Test Fuel |
 |
 |
Emission Certification Fuels - Diesel |
| Diesel PC-10 Test Fuel |
 |
 |
Deposit Test Fuels - Diesel |
| Diesel PC-9 Test Fuel |
 |
 |
Deposit Test Fuels - Diesel |
| Diesel Secondary Reference Fuel T-24 |
 |
 |
For cetane number analysis per ASTM D 613 |
| Diesel Special Test Fuel |
 |
|
Emission Certification Fuels - Diesel |
| Diesel Test Fuel No Sulfur (<3 ppm) |
 |
 |
Emission Certification Fuels - Diesel |
| dimethyl 3,3'-thiodipropionate (developmental) |
 |
 |
|
| dipentene dimercaptan |
 |
 |
|
| Di-tert-Butyl Disulfide |
 |
 |
Fuel Blendstocks |
| Driveability Index Fuel |
 |
|
RVP Test Fuels |
| Driveability Index Fuel |
 |
|
Octane Test Fuels |
| E-10 Fuel |
|
|
Oxygenated Test Fuels |
| E-100 Automotive Grade Ethanol |
 |
|
Fuel Blendstocks |
| EcoSolv® Fluid (class IIIA) |
 |
 |
Drycleaning |
| E-III®Aviation Grade FTF |
 |
 |
Accurately simulates jet fuel fires |
| E-III® Industrial Grade FTF |
 |
 |
Useful for chemical plant and refinery fire training |
| E-III® Supreme Grade FTF |
 |
 |
Formulated with oxygenates to provide the cleanest burning grade |
| E-Series acetylene hydrogenation catalyst |
 |
 |
For the selective hydrogenation of acetylene to ethylene in olefin cracker plants |
| ethyl n-octyl sulfide |
 |
 |
|
| Ethyl tert-Butyl Ether (ETBE) |
 |
 |
Fuel Blendstocks |
| ethylcyclohexane |
 |
 |
|
| Flash Point Check Fuel p-xylene |
 |
 |
Calibration Standard |
| HC-DCF™ Low Flash Solvent (class II) |
 |
 |
Drycleaning |
| Heavy Reformate |
|
|
Fuel Blendstocks |
| High-Octane Blendstock |
 |
|
Fuel Blendstocks |
| Hydrocarbon Fluid, type I |
 |
 |
Rubber Swelling Test Fluid |
| Hydrocarbon Fluid, type II |
 |
 |
Rubber Swelling Test Fluid |
| Hydrocarbon Fluid, type III |
 |
 |
Rubber Swelling Test Fluid |
| Hydrocarbon Fluid, type VII |
 |
 |
Rubber Swelling Test Fluid |
| isobutane, instrument grade |
 |
 |
|
| isobutane, pure grade |
 |
 |
|
| isobutyl mercaptan (developmental) |
|
 |
|
| isooctane (2,2,4-trimethylpentane), pure grade |
 |
 |
|
| isopropyl mercaptan |
 |
 |
Flavors & Fragrances |
| J Reference Fuel |
 |
 |
Deposit Test Fuels - Gasoline |
| Jet A |
 |
 |
Aviation Test Fuels |
| Jet Fuel RF (AMS 2629 Type I) |
 |
 |
Avation Test Fuels |
| JP-4 (MIL-T-5624) |
 |
 |
Aviation Test Fuels |
| JP-5 (MIL-T-5624) |
 |
 |
Aviation Test Fuels |
| JP-8 (MIL-T-83133) |
 |
 |
Aviation Test Fuels |
| Leaded Test Gasoline |
|
|
Octane Test Fuels |
| Mercasol-L™ salt (sodium 2-hydroxyethanethiolate) |
 |
 |
Leather & Textile Processing |
| methyl 3-mercaptopropionate |
 |
 |
Biocides |
| Methyl tert-Butyl Ether |
|
 |
|
| methylcyclohexane, pure grade |
 |
 |
|
| Mid-Cut Reformate |
 |
|
Fuel Blendstocks |
| MIL-C-7024E, type III |
 |
 |
Aviation Test Fuels |
| MIL-G-3056 Combat Gasoline, Superceded by ASTM D-4814 (UTG-91) |
 |
 |
Emission Certification Fuels - Gasoline |
| MIL-G-3056 Combat Gasoline, Superceded by ASTM D-4814 (UTG-91) |
 |
 |
Rubber Swelling Test Fluid |
| MOLYFLO® Flotation Oil |
 |
 |
Excellent collector oil for molybdenite in by-product molybdenite recovery plants. Also, a primary or scavenger collector for molybdenite in primary molybdenite ores and in copper-molybdenum bulk flotation processes. |
| neohexane, pure grade |
 |
 |
|
| Nose Guard® Masking Agent |
 |
 |
Odor control product. |
| No-Sulfur Gasoline |
 |
|
Emission Certification Fuels - Gasoline |
| Octane Test Fuel |
 |
|
Octane Test Fuels |
| ORFOM® CO 100 Collector |
 |
 |
Selective sulfur based collector of base metal and tarnished sulfides, gold and native copper. Works very well with Molyflo® and Orfom® oil collectors. Fast kinetics. Dries/suppresses froth. Selectivity at low dosages. |
| ORFOM® CO 200 Collector |
 |
 |
Highly effective primary collector for sphalerite. Greater zinc recover in some Pb/Zn ores. Gives a pronounced increase in zinc recovery at a 30% reduction in activator levels. Used effectively as a secondary/scavenger collector for base metal sulfides. Works very well with Molyflo® and Orfom® oil collectors |
| ORFOM® D8 Depressant |
 |
 |
Very effective iron, copper and lead sulfide depressant in primary and secondary circuits. Water soluble. Effective as a secondary copper depressant. Removes graphite from sulfide ores. May not depress chalcopyrite. pH independent. |
| ORFOM® F2 Frother |
 |
 |
Frother produces a medium depth, fast-breaking froth, where a relatively weak, non-persistent froth is desired. May be of benefit where MIBC is used and a less brittle froth is desired. |
| ORFOM® F8 Frother |
 |
 |
Stronger, medium depth, fast breaking proprietary alcohol frother. Non-persistent froth. |
| ORFOM® Grade 3 Tannin |
 |
 |
Zinc leach modifier to reduce sulfur disposition on sphalerite, and subsequent higher recoveries. Grade 3 Tannin also inhibits the disposition of sulfur in autoclaves and flash cooling towers. In high bentonite ores, Grade 3 Tannin can significantly reduce the pulp viscosity due to clay minerals. It benefits fluorite flotation and depresses calcite. |
| ORFOM® MCO Collector Oil |
 |
 |
Highly effective non-polar collector for molybdenite. Greater selectivity to moly than other oil products. Used as the primary collector in primary and by-product molybdenum ores. Most effective if added to the primary grinding stage. |
| ORFOM® MCX Flotation Oil |
 |
 |
High performance collector oil for both primary and by-product molybdenite. Greatly improves moly recovery in finely ground ores. Can be used in higher dosages than kerosene/diesel/other oils without froth suppression. |
| ORFOM® R200A Collector |
 |
 |
Flotation of copper or copper-activated minerals such as sphalerite. |
| ORFOM® R200M Collector |
 |
 |
Flotation of chalcopyrite, chalcocite, and other sulfide minerals.
|
| ORFOM® SX 10 Solvent Extraction Diluent |
 |
 |
Solvent extraction diluent for metals. Good phase break. Used where low aromatic diluent is desireable. More effective in chloride leach solutions. Good selectivity. |
| ORFOM® SX 11 Solvent Extraction Diluent |
 |
 |
Solvent extraction diluent for metals. High flash, good phase disengagement. Very effective in high temperature and chloride leach circuts. |
| ORFOM® SX 12 Solvent Extraction Diluent |
 |
 |
Solvent extraction diluent for metals. Specially treated for rapid phase break in high throughput circuts. Excellent phase disengagement, rapid extraction kinetics and high Cu/Fe selectivity. |
| ORFOM® SX 18 Solvent Extraction Diluent |
 |
 |
Solvent extraction diluent for metals. Specially designed lower density/lower flash diluent for specialized separations (nanotechnology). |
| ORFOM® SX 80 Solvent Extraction Diluent |
 |
 |
Solvent extraction diluent for metals. Very high performance blend of hydrocarbons yielding high flash, and excellent phase disengagement, rapid kinetics and high Cu/Fe selectivity. Excellent diluent properties. |
| Orfom® SX 1 Solvent Extraction Diluent |
 |
|
|
| ORFOM® SX 7 Solvent Extraction Diluent |
 |
 |
Solvent extraction diluent for metals, especially copper. High flash, good phase seperation and rapid extraction kinetics and high selectivity. Not for use with starter sheets. |
| Oxygenated Test Gasoline |
 |
|
Oxygenated Test Fuels |
| PHILFLO® 50 Flotation Oil |
 |
 |
Extender oil for potash and phosphate flotation. Similar to our Philflo Flotation Oil, but modified to a lower viscosity for optimization of differing potash and phosphate ore compositions. . |
| PHILFLO® Flotation Oil |
 |
 |
Extender Oil for potash and phosphate flotation. Non-polar, propriatary blend of heavy oils which greatly improve recoveries by enhancing flotation of coarse particles at much lower dosages than kerosene, fuel oil and similar oils. |
| PRF (ASTM) Octane Blend No. 60 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 80 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 81 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 82 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 83 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 84 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 85 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 86 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 87 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 88 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 89 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 90 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 91 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 92 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 93 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 94 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 95 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 96 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 97 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 98 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF (ASTM) Octane Blend No. 99 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF n-heptane |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF Isooctane |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF Isooctane + TEL (TEL of 0.1 - 6.0 gm/gal available) |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| PRF Octane Number Blends, even (60, 82-98) |
 |
|
for knock engine octane analysis per ASTM D 2699 & D 2700 testing |
| PRF Octane Number Blends, odd (81-99) |
 |
|
for knock engine octane analysis per ASTM D 2699 & D 2700 testing |
| propane, instrument grade |
 |
 |
|
| propane, pure grade |
 |
 |
|
| Reference Fuel A |
 |
 |
ASTM D 471 Rubber Swelling Test Fluid |
| Reference Fuel B |
 |
 |
ASTM D 471 Rubber Swelling Test Fluid |
| Reference Fuel C |
 |
 |
ASTM D 471 Rubber Swelling Test Fluid |
| Reference Fuel D |
 |
 |
ASTM D 471 Rubber Swelling Test Fluid |
| Reference Gas Oil #1 |
 |
 |
Calibration Standard |
| RF-08-A-85 Fuel |
 |
|
Octane Test Fuels |
| RF-A (reformulated fuel without additive) |
 |
|
Emission Certification Fuels - Gasoline |
| RF-A (reformulated fuel) |
 |
 |
Emission Certification Fuels - Gasoline |
| RVP Test Fuel |
 |
|
RVP Test Fuels |
| Scentinel® A Gas Odorant |
 |
 |
Liquid Propane Gas Odorants |
| Scentinel® C Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® E Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® F-20 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® F-25 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® F-35 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® F-40 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® F-50 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® F-80 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® H-85 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® N Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® O-10 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® O-10-M Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® O-10-SB Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® P Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® Q Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® S-20 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® S-35 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® S-40 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® S-50 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® T Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® T-30 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® T-50 Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® TB Gas Odorant |
 |
 |
Natural Gas Odorants |
| Scentinel® TE Gas Odorant |
 |
 |
Natural Gas Odorants |
| Soltrol® 10 isoparaffin + TEL |
 |
 |
Deposit Test Fuels - Gasoline |
| Sulfole® 100 mercaptan (tert-dodecyl mercaptan/tert-nonyl mercaptan blend) |
 |
 |
|
| Sulfole® 90 mercaptan (tert-nonyl mercaptan) |
 |
 |
|
| sulfur calibration standard |
 |
 |
|
| tetrahydrothiophene (thiophane) |
 |
 |
LPG Odorants |
| Toluene Standard Fuel 102.5 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 103.3 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 107.6 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 113.0 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 65.1 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 75.6 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 85.2 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 89.3 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 93.4 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 94.8 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 96.9 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 98.3 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene Standard Fuel 99.8 |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| Toluene, Reference Fuel Grade |
 |
 |
Knock Engine Calibration for Octane Analysis per ASTM D-2699 and D 2700. |
| TT100 UL |
 |
 |
For off-road and specialty automotive applications, as well as snowmobiles, motorcycles, and boats used in sanctioned racing events |
| TT105 UL |
 |
 |
For off-road competitive motor sports, this unleaded 105-octane racing fuel is the ultimate in unleaded high-performance fuels Does not contain metal additives. |
| TT111 L |
 |
 |
For all forms of off-road and off-street competitive motor sports in engines with effective compression ratios up to 13:1 |
| TT114 L |
 |
 |
For all forms of off-road and off-street competitive motor sports in engines with effective compression ratios of 15:1 |
| TT118 L |
 |
 |
For off-road use only in exotic high-compression engines (up to 16: 1) primarily for drag racing but suitable for other forms of racing as well |
| UTG-91 (unleaded test gasoline) |
 |
 |
Emission Certification Fuels - Gasoline |
| UTG-93 (unleaded test gasoline) |
|
 |
Emission Certification Fuels - Gasoline |
| UTG-96 (unleaded test gasoline) |
 |
 |
Emission Certification Fuels - Gasoline |
| Volatility Test Fuels |
|
|
RVP Test Fuels |
|
|
|
|