| All Ryton® PPS and Xtel® Alloys |
| BR111 and BR111BL |
 |
 |
Creep Resistance, High Modulus, Dimensional Stability |
| BR42B and BR42C |
|
|
Low Friction, High Wear Resistance |
| R10-110BL |
|
|
Lower Cost, 220°C/240°C UL RTI, Arc Resistance, Dimensional Stablitiy |
| R-4 and R-4 02 |
|
|
General Purpose |
| R-4-200NA and R-4-200BL |
|
|
Enhanced Strength and Toughness |
| R-4-220NA and R-4-220BL |
|
|
Exceptional Resistance to Hot Water and Engine Coolants |
| R-4-230NA and R-4-230BL |
|
|
Low Flash, High Flow, Good Strength |
| R-4-XT and R-4 02XT |
|
|
Improved Strength |
| R-7 and R-7 02 |
|
|
General Purpose Mechanical/Electrical |
| R-7-120NA and R-7-120BL |
|
|
220°C/240°C UL RTI, Arc Resistance, Lower Cost, Dimensional Stability |
| R-7-121NA |
|
|
220°C/240°C UL RTI, Arc Resistance, Lower Cost, Dimensional Stability, Good Flow |
| R-7-220 |
|
|
Creep Resistance, High Modulus, Dimensional Stability, Hydrolytic Stability |
| Ryton® PPS Coating Resins |
|
|
Coatings (Thin and Thick), Slurries, Electrostatic Spray, Screened, Flocking, Fluidized Bed Application |
| Ryton® PPS Powders |
|
|
Coatings, Compounds, Extrusion |
| XE3035BL |
|
|
Injection molding grade - Glass fiber reinforced, high ductility & impact strength with good thermal stability. |
| XE3035NA and XE3035BL |
|
|
Injection molding grade - Glass fiber reinforced, high ductility & impact strength with good thermal stability. |
| XE3202NA |
|
|
Extrusion grade - High ductility for wire coatings |
| XE4050BL |
|
|
Injection molding grade - Glass fiber & mineral reinforced, high ductility & impact strength with good thermal stability. |
| XE5030NA and XE5030BL |
|
|
Injection molding grade - Glass fiber reinforced, high ductility, high flow & high impact strength with good thermal stability. |
| XE5300NA |
|
|
Extrusion grade - Excellent mechanical strength, elongation and chemical resistance. |
| XK2040 and XK2140 |
|
|
40% Glass filled, Very High Flow, Virtually No Flash, V-0 |
| XK2140 |
|
|
40% Glass filled, Very High Flow, Virtually No Flash, V-0, Black |
| XK2240 and XK2340 |
|
|
40% Glass filled, High Impact Strength, Precision Molding |
| XK2340 |
|
|
40% Glass filled, High Impact Strength, Precision Molding, Black |
| XK2760BL |
|
|
Excellent Mechanical Strength, Toughness and Rigidity, Low Flash Characteristics |
|
|
|
|
|
