haht.product_family: HDPE, haht.material_numbers: , haht.trade_name: EHM 6007, haht.conversion_process: Blow Molding; ; , haht.product_name: EMEA, haht.content_type: TDS, cpchem.advancedSearch.section:
TDS - EHM 6007
For more information and technical
assistance contact:
Chevron Phillips Chemicals International NV
Brusselsesteenweg 355
B - 3090 OVERIJSE
Tel: +32 2 689 12 11
Fax: +32 2 689 13 04
PREMIUM EXTRUSION AND RIGID PACKAGING RESINS
Marlex® EHM 6007
Polyethylene Resin

Customer Benefits
A blow molding grade resin that offers
  • A high quality product for those critical food packaging jobs
  • Good impact strength and stiffness
    • Specification Data
    Meets these requirements
  • ASTM D4976 - PE244
  • FDA regulation 177.1520.  Suitable for food packaging applications.
    Processing Recommendations
    To ensure optimum part quality
  • Stock temperature should be between 340-400° F (171-205° C)
    • Suggested Applications
    Lightweight containers for bottling products such as
  • Milk
  • Distilled water
  • Soft drink concentrate
  • Fruit juice, etc.

    • NOMINAL PHYSICAL PROPERTIES (1) English SI Method
      Density  60 lbs/ft3 0.964 g/cm3 ASTM D1505
      Melt Index, 190/2.16 0.7 g/10 min 0.7 g/10 min ASTM D1238
      Tensile Strength at Yield, 2 in/min, Type IV Bar 4400 psi 30 MPa ASTM D638
      Elongation at Break, 2 in/min, Type IV bar >300% >300% ASTM D638
      ESCR, Condition A (100% lgepal), F50 15-20 h 15-20 h ASTM D1693
      Brittleness Temperature, Type A, Type I specimen <-94 °F <-70°C ASTM D746
      Flexural Modulus 240,000 Psi 1654  Mpa D790
    (1) Physical properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928
    The nominal properties reported herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes.
    MSDS #E100 Revision Date May, 2001
    Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question and is further advised against relying on the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
    06887402FACC471581615D7840AC9D06