haht.product_family: HDPE, haht.material_numbers: , haht.trade_name: C513, haht.conversion_process: Blow Molding; ; , haht.product_name: EMEA, haht.content_type: TDS, cpchem.advancedSearch.section:
TDS - C513
For more information and technical
assistance contact:
Chevron Phillips Chemical International NV
Brusselsesteenweg 355
B-3090 OVERIJSE
Tel: +32 2 689 12 11
Fax: +32 2 689 13 04
PREMIUM EXTRUSION AND RIGID PACKAGING RESINS
Marlex® C513
High Density Polyethylene

Customer Benefits
This extra high molecular weight hexene copolymer is tailored for intermediate bulk container applications which require
  • Outstanding impact resistance
  • Outstanding ESCR
  • Excellent processability
    • Specification Data
     
  • ASTM D1248 - Type III, Class A, Category 5
  • ASTM D4976-95 - PE 235
    Processing Recommendations
    Maintain these conditions for optimum part quality
  • Blow molding stock temperature 380-430° F (193-221° C).
    • Suggested Applications
    Blow-molded items such as
  • Intermediate bulk containers
  • Agricultural containers

    • NOMINAL PHYSICAL PROPERTIES (1) English SI Method
      Melt Index, HLMI, 190/21.6 6.2g/10 min. -- g/10 min ASTM D1238
      Tensile Strength at Yield, 2 in/min, Type IV Bar 3450 psi -- MPa ASTM D638
      Elongation >700 % --  % D638 Type IV
      ESCR, Condition A (100% lgepal), F50 >2000 h -- h ASTM D1693
      ESCR, Condition B (100% lgepal), F50 >2000 h -- h ASTM D1693
      ESCR, Condition B (10% lgepal), F50 >2000 h -- h ASTM D1693
      Durometer Hardness, Type D (Shore D) 66 -- Shore D
      Vicat Softening Temperature, Loading 1, Rate A 252°F --°C ASTM D1525
      Heat Deflection Temperature, 66 psi, Method A 150°F --°C ASTM D648
      Brittleness Temperature <-94 °F -- °C D746
      Flexural Modulus 160,000 Psi --  Mpa ASTM D790
      Tensile Impact, Type S bar 236 ft•lb/in2 -- kJ/m2 ASTM D1822
    (1) Physical properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928.
    The nominal properties reported herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes.
    MSDS #E100 Revision Date December, 1999
    Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question and is further advised against relying on the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
    9BF6EC47EC5F4207B790DCB14028B8F6