haht.product_family: MDPE, haht.material_numbers: , haht.trade_name: HMN TR-935 / HMN TR-935G, haht.conversion_process: Rotational Molding; ; , haht.product_name: Polyethylene, haht.content_type: TDS, cpchem.advancedSearch.section:
TDS - HMN TR-935 / HMN TR-935G
For more information and technical
assistance contact:
Chevron Phillips Chemical Company LP
P.O. Box 4910
The Woodlands, TX 77387-4910
800.231.1212
PREMIUM EXTRUSION AND RIGID PACKAGING RESINS
Marlex® HMN TR-935 / HMN TR-935G
MEDIUM DENSITY POLYETHYLENE

These hexene copolymers are tailored for rotational molding applications that require:
  • Wide process windows and excellent flow
  • Long-term UV stabilization
  • Excellent impact strength
  • Excellent ESCR
    • These resins are available in:
  • Pellet form - HMN TR-935
  • 35 mesh powder - HMN TR-935G
    These resins meet these specifications:
  • ASTM D4976 - PE 223
  • FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c) Table 2.  Single use articles contacting food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII.  Repeated use articles contacting all food types defined in 21 CFR 176.170(c) Table 1.
  • NSF / ANSI Standard 61 for potable water (CLD 23)
    • Typical applications for HMN TR-935 and HMN TR-935G include items such as:
  • Recreational and agricultural equipment
  • Toys and carts

    • NOMINAL PHYSICAL PROPERTIES(1) (2) English SI Method
      Density --- 0.936 g/cm3 ASTM D1505
      Melt Index, 190/2.16 --- 6.0 g/10 min ASTM D1238
      ESCR, Condition A (100% Igepal), F50 >1,000 h >1,000 h ASTM D1693
      ESCR, Condition A (10% Igepal), F50 130 h 130 h ASTM D1693
      Durometer Hardness, Type D (Shore D) 59 59 ASTM D2240
      Vicat Softening Temperature, Loading 1, Rate A 231°F 110°C ASTM D1525
      Brittleness Temperature, Type A, Type I specimen -103°F -75°C ASTM D746
      Melting Temperature 263°F 128°C ASTM D3418
      Crystallization Temperature 234°F 112°C ASTM D3418
    ROTATIONAL MOLDED PROPERTIES(1) (3) English SI Method
      Impact Strength, 1/8" (3.2 mm) thickness, -40 C° 75 ft·lb 102 J ARM Impact
      Impact Strength, 1/4" (6.35 mm) thickness, -40 C° 175 ft·lb 237 J ARM Impact
      Tensile Strength at Yield, 2 in/min, Type IV bar 2,400 psi 17 MPa ASTM D638
      Elongation at Break, 2 in/min, Type IV bar 750% 750% ASTM D638
      Flexural Modulus, Tangent - 16:1 span:depth, 0.5 in/min 110,000 psi 760 MPa ASTM D790
      Flexural Modulus, 2% Secant - 16:1 span:depth, 0.5 in/min 90,000 psi 620 MPa ASTM D790
      Heat Deflection Temperature, 66 psi, Method A 136°F 58°C ASTM D648
      Heat Deflection Temperature, 264 psi, Method A 106°F 41°C ASTM D648
    1. The nominal properties reported herein are typical of the product, but do not reflect normal testing variance and therefore should not be used for specification purposes.  Values are rounded. 
    2. The physical properties were determined on compression-molded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1.
    3. Properties were measured on rotational molded samples with 1/8” (3.17 mm) average thickness, unless otherwise noted.  The average peak internal air temperature during molding was 400ºF.
    MSDS #240370 Revision Date May, 2006
    Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question and is further advised against relying on the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
    F41445BB543E4412A4B912FDF841718E