haht.product_family: HDPE, haht.material_numbers: , haht.trade_name: HHM 5502-01ST, haht.conversion_process: Sheet Extrusion; ; Blow Molding, haht.product_name: Polyethylene, haht.content_type: TDS, cpchem.advancedSearch.section:
TDS - HHM 5502-01ST
For more information and technical
assistance contact:
Chevron Phillips Chemical Company LP
P.O. Box 4910
The Woodlands, TX 77387-4910
800.231.1212
PREMIUM EXTRUSION AND RIGID PACKAGING RESINS
Marlex® HHM 5502-01ST
HIGH DENSITY POLYETHYLENE

This high molecular weight, hexene copolymer is tailored for extruded, thermoformed and blow molded applications that require:
  • Excellent stiffness
  • Good processability
  • Excellent process stability
    • Typical sheet extrusion and thermoforming applications include:
  • Signage
  • Tote boxes
  • Food containers
  • Fragility packaging
    Typical blow molding applications include:
  • Tote boxes
  • Wastebaskets
  • Storage sheds and cabinets
    • This resin meets these specifications:
  • ASTM D4976 - PE 235
  • FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)
  • Listed in the Drug Master File

    • NOMINAL PHYSICAL PROPERTIES (1) English SI Method
      Density --- 0.955 g/cm3 ASTM D1505
      Melt Index, 190/2.16 --- 0.25 g/10 min ASTM D1238
      Tensile Strength at Yield, 2 in/min, Type IV bar 4,000 psi 27 MPa ASTM D638
      Elongation at Break, 2 in/min, Type IV bar 600% 600% ASTM D638
      Flexural Modulus, Tangent - 16:1 span:depth, 0.5 in/min 200,000 psi 1,370 MPa ASTM D790
      ESCR, Condition A (100% Igepal), F50 45 h 45 h ASTM D1693
      ESCR, Condition B (100% Igepal), F50 35 h 35 h ASTM D1693
      Brittleness Temperature, Type A, Type I specimen <-103°F <-75°C ASTM D746
    1. The nominal properties reported herein are typical of the product, but do not reflect normal testing variance and therefore should not be used for specification purposes.  Values are rounded.  The physical properties were determined on compression molded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1.
      2.
    MSDS #240370 Revision Date April, 2004
    Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question and is further advised against relying on the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the information is applicable to the user's specific application. Chevron Phillips Chemical Company LP does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract, tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as federal, state or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
    FB6550BC890B4E5188A808EF18E6C07D