DRILL-SURE™ OBM ADDITIVE

DRILL-SURE™ OBM Additive is a multipurpose oil mud conditioner that provides high temperature/high pressure (HTHP) fluid loss control, reduced torque and drag and borehole stabilization in oil-based drilling fluids including diesel, mineral and synthetic oils.
 
DRILL-SURE™ OBM Additive is a 100% active dry product that may be mixed at the mud plant or rig site through a standard mud hopper. DRILL-SURE™ OBM Additive may be mixed into a new oil mud without the effects of thinning or reductions in electrical stability (ES). DRILL-SURE™ OBM Additive is a stand-alone product but is compatible with other fluid loss additives.
 
 
 
Advantages
 
  • Typical treatment concentrations range from 1.0 – 4.0 ppb for HTHP filtrate control to ≥149 °C (300 °F); for temperatures above 149 °C (300 °F) higher concentrations may be needed
  • Does not appreciably thin the drilling fluid 
  • Produces nice thin, tough filter cakes and reduces slip stick tendencies
  • Reduces torque and drag effects of most oil muds
  • Acts as a shale stabilizer
  • Good thermal stability to provides total HTHP fluid loss control without the need for other additives such as Gilsonite®, amine treated lignite or polymeric fluid loss additives
  • Works in oil muds of any density
  • Does not reduce the ES of the mud
  • Mixes easily at the mud plant or on the drilling rig through a standard mud hopper no high shear mixing required
  • Is compatible with most other commonly used drilling mud additives
  • Does not need to be pre-wet before mixing
  • No need to bypass shale shakers or flowline cleaners when adding this product to the system
Technical Data Sheet
DRILL-SURE Additive View Download
Safety Data Sheets
Area Language
Europe Dutch View Download
Europe English View Download
Europe French View Download
Europe Portuguese View Download
Europe Spanish View Download
United States English View Download